Compliance Support for OEM Pump Projects
Micro Pump Certifications and Quality Control
JSG DC PUMP provides model-specific compliance documentation and quality-control support for miniature air, vacuum, liquid and piston pump projects. Certification scope depends on the selected pump model, motor, voltage, materials and final configuration.
Certification Documents Must Match the Approved Configuration
CE and RoHS documentation is available for many JSG micro pump models and configurations. Before a document is supplied, we confirm the exact model and the version intended for the OEM equipment.
Model-specific scope
The covered model, motor type, voltage and construction must match the product being evaluated.
Market and standard review
Tell us the destination market and requested standard so the applicable document set can be checked.
Project documentation
Full files can be supplied after the pump configuration and project requirement are confirmed.
DOCUMENT PREVIEW
Selected JSG27 CE and RoHS Documentation
The blurred documents shown here relate to selected JSG27 micro pump models. They demonstrate the type of compliance documentation available, but they should not be interpreted as covering every JSG pump or every customized version.
Contact us with the required model, configuration and target market to receive the applicable unblurred documentation for technical or purchasing review.
Typical Quality-Control Flow for an OEM Pump Project
The inspection plan is defined according to the product and order requirement. A typical project may include the following stages.
Requirement Review
Confirm medium, working point, voltage, control, duty cycle, noise target and environment.
Material and Parts Check
Verify specified components, wetted materials, wiring, connectors and key incoming parts.
Assembly Control
Monitor the approved assembly method and the product-specific in-process checkpoints.
Performance Validation
Check flow, pressure or vacuum against the agreed test condition and acceptance criteria.
Final Inspection
Confirm appearance, wiring, labeling, packaging and required shipment records.
Performance and Production Evidence
Working-point data and test conditions are more useful than unsupported headline values. The exact checks depend on the selected pump and its OEM application.
Information Required for Compliance and Validation Review
Send the items below so we can identify the correct pump documents and testing route.
| Pump identification | Exact model, motor type, voltage, control method and any customized parts. |
|---|---|
| Application | Equipment type, medium, working flow and pressure or vacuum, and duty cycle. |
| Destination market | Country or region where the final equipment will be sold or evaluated. |
| Requested documents | CE, RoHS, material declarations, test records, drawings or other project-specific files. |
| Project stage | Initial selection, sample validation, certification preparation or mass-production approval. |
Frequently Asked Questions
Are all JSG pumps covered by one certificate?
No. Certification scope varies by model and configuration. The exact pump version must be confirmed first.
Can full certificates be supplied?
Applicable files can be provided for project review after the model, configuration and required market are confirmed.
Can JSG verify a required working point?
Yes, the proposed pump can be reviewed or tested against an agreed flow, pressure or vacuum condition.
Does certification cover the complete customer device?
No. Pump documentation does not replace the compliance assessment required for the customer’s complete equipment.
Request Documentation for Your Pump Configuration
Send the pump model, voltage, motor, medium, target market, required standard and estimated quantity. We will check the applicable documents and identify any additional validation needed.
