If your equipment needs stable airflow or vacuum suction but has limited installation space, selecting the right mini diaphragm air pump can be challenging. You need more than a compact motor: the pump must deliver sufficient flow under actual operating pressure or vacuum, match your voltage requirements, and operate reliably within your device’s duty cycle. The BD-04 series from Shenzhen Jingsuguang Technology Co., Ltd. (JSG DC PUMP) addresses these requirements with brushed DC diaphragm pump configurations for both pressure and vacuum applications. With 6V, 12V and 24V options, airflow up to 22 L/min across the product platform, and pressure capability up to 3.5 bar, it provides a practical starting point for OEM equipment development.
What Makes the BD-04 Mini Diaphragm Air Pump Suitable for OEM Equipment?
The BD-04 is a compact brushed DC diaphragm pump platform designed for equipment that requires positive air pressure, negative pressure or clean gas transfer. Instead of using one configuration for every application, JSG offers two versions to address different operating requirements.
- BD-04A: Pressure-type mini DC air pump for inflation, pneumatic support and air delivery.
- BD-04V: Vacuum-type mini DC vacuum pump for suction, negative-pressure generation and gas extraction.
This configuration allows you to select the appropriate pump according to your equipment’s working principle without redesigning the entire system around a larger pump.
Key Features of the Brushed DC Diaphragm Pump
- Multiple voltage options: 6V, 12V and 24V.
- Flow range: approximately 11–20 L/min in the listed specifications, with higher platform output subject to configuration.
- Maximum pressure: 2.5–3.5 bar for BD-04A.
- Maximum vacuum: approximately -75 to -80 kPa for BD-04V.
- Compact dimensions: approximately 40 × 72 × 101 mm.
- Lightweight construction: approximately 305 g.
- Brushed motor with an indicated service life of approximately 1,000 hours.
These specifications make the BD-04 relevant to portable devices and embedded OEM systems where installation space and electrical compatibility matter.
BD-04A vs. BD-04V: Which Mini Diaphragm Pump Should You Choose?
Although both models share the same brushed diaphragm pump platform, their operating functions differ. Selecting the correct version depends primarily on whether your equipment needs positive pressure or vacuum suction.
| Specification | BD-04A | BD-04V |
|---|---|---|
| Pump function | Air pressure | Vacuum suction |
| Voltage | 6V / 12V / 24V | 6V / 12V / 24V |
| Flow range | 11–20 L/min | 11–20 L/min |
| Maximum pressure | 2.5–3.5 bar | Not applicable |
| Maximum vacuum | Not applicable | -75 to -80 kPa |
| Motor | Brushed DC | Brushed DC |
| Weight | Approx. 305 g | Approx. 305 g |
| Dimensions | Approx. 40 × 72 × 101 mm | Approx. 40 × 72 × 101 mm |
Actual output depends on voltage, load conditions and model configuration. Confirm the applicable performance curve before final selection.
Choose BD-04A when you need compressed air for inflation or pneumatic functions. In contrast, BD-04V is more suitable when your system requires suction or negative pressure.
How Does the Mini Diaphragm Air Pump Perform in Real Applications?
A pump’s maximum flow rate does not represent its output under every operating condition. When you integrate a mini diaphragm air pump into an actual device, tubing resistance, filters, valves and working pressure can all affect performance.
For example, a portable pressure therapy device may use BD-04A to deliver approximately 15 L/min at 3 bar, subject to the specified test conditions. A beauty suction device may use BD-04V with a reference vacuum level of approximately -80 kPa and a reference flow of 20 L/min.
Recommended Applications
1. Beauty and Personal Care Equipment
Compact beauty devices often require controlled suction or airflow without taking up excessive internal space. BD-04V can support vacuum-based functions, while BD-04A can provide airflow for pneumatic applications.
2. Portable Medical and Laboratory Equipment
Portable instruments may require air transfer, vacuum generation or pneumatic support. You should verify material compatibility, operating conditions and applicable regulatory requirements before integrating the pump into medical equipment.
3. Small Industrial and Embedded Systems
The BD-04 series can also support compact automation equipment, gas-transfer functions and customized pneumatic devices where a small brushed DC pump fits the system design.
How to Select the Right Mini Diaphragm Air Pump
To reduce unnecessary prototype changes, follow these steps before confirming your OEM pump configuration:
- Define the medium: Confirm whether your equipment handles clean air, inert gas or humid air.
- Determine the working point: Specify required flow at operating pressure or vacuum rather than relying only on maximum values.
- Confirm electrical requirements: Check whether your system uses 6V, 12V or 24V and whether additional control functions are necessary.
- Review installation conditions: Measure available space, mounting positions, tubing connections and allowable noise.
- Select wetted materials: EPDM is available for standard applications, while FKM can be considered when improved chemical resistance is required.
- Validate the sample: Test flow, pressure, vacuum, current, noise and temperature under your actual operating conditions.
The BD-04 uses a side-mounted four-hole fixing structure with 4 mm mounting holes, supporting secure installation in compact equipment.

Why Choose JSG DC PUMP for OEM Diaphragm Pump Projects?
Shenzhen Jingsuguang Technology Co., Ltd. has developed and manufactured miniature pumps since 2003. Operating under the JSG DC PUMP brand, the company provides miniature air, vacuum, diaphragm, piston and liquid pump platforms for OEM equipment.
Its engineering and manufacturing capabilities support the complete project process:
- OEM and ODM customization: Voltage, output range, sealing materials, connections and installation details.
- Performance validation: Flow, pressure, vacuum, current, power and noise evaluation.
- Quality management: ISO 9001:2015-certified quality management system.
- Sample development: Prototype preparation and testing before pilot production.
- Manufacturing support: Assembly, in-process inspection, aging evaluation and batch production.
JSG also coordinates injection molding for pump housings and project-specific plastic components. Tooling specifications, material selection and acceptance criteria are reviewed according to individual project requirements.
FAQ
1. Is the BD-04 a 12V mini diaphragm air pump?
Yes. The BD-04 platform includes 6V, 12V and 24V configurations. Confirm the exact voltage and corresponding performance parameters when ordering.
2. Can the BD-04 pump provide both pressure and vacuum?
The platform supports both functions through separate models. BD-04A provides positive air pressure, while BD-04V generates vacuum suction. They are not interchangeable configurations.
3. Can JSG customize the mini diaphragm air pump for OEM projects?
Yes. JSG supports project-based customization involving voltage, output range, sealing materials, connections and installation requirements. You can submit your technical specifications for engineering assessment and sample validation.
Conclusion
The BD-04 series offers a practical mini diaphragm air pump solution for OEM equipment requiring compact air pressure or vacuum suction. With BD-04A and BD-04V configurations, 6V, 12V and 24V options, and a compact mounting structure, you can match the pump to your device’s actual operating requirements. Backed by Shenzhen Jingsuguang Technology Co., Ltd.’s manufacturing experience since 2003 and ISO 9001:2015-certified quality management system, JSG DC PUMP supports pump selection, sample validation and OEM customization.
CTA
Are you developing a portable beauty device, medical instrument or compact industrial system? Send your target flow, working pressure or vacuum, voltage, medium, installation dimensions and estimated order quantity. JSG DC PUMP can review your requirements, recommend a suitable BD-04 configuration and discuss OEM sample development.
